PSI Wall Systems, clad in High Pressure Laminate surfacing, offer permanent decorative paneling designed to provide flexibility, durability and beauty. These attractive, low maintenance wall coverings are ideal for commercial, contract and institutional applications. Wall Systems are available in both progressive and non-progressive designs.

Manufactured by Panel Specialists, Inc, distributed by:

 

    Interior Surface Systems
    A Division of Horseshoe Wood, Inc.
    P.O. Box 807 • Temple, TX 76503 • 1-800-610-9809 • Fax 254-778-1096

Product Descriptions || Sample Specifications || Wall Panel Details
 Wainscot & Base Section Details || Corner Details || Wall Panel System Moldings
Photo Applications

PRODUCT FEATURES: All PSI Wall Systems are engineered to offer interior solutions to both new and refurbished construction with accent on:
Design Flexibility • System Flexibility
Long-term economic benefit
Low maintenance • Ease of installation

MATERIALS AND FINISHES: PSI Wall Systems are available in all colors and finishes manufactured by all major High Pressure Laminate manufacturers. (Note: certain patterns and finishes may affect pricing and order limitations).

BASIC LIMITATIONS: PSI Wall Systems are for interior use only and must be attached to a suitable frame. PSI Wall Systems must be installed according to installation details outlined on this website.

When interior paneling is on an exterior wall or in a wet area, it is recommended that a barrier sheet of plastic film be placed between the outside wall and the panels in order to aid in preventing condensation effecting the stability of the panels.

WARRANTY: Panel Specialists, Inc warrants all its laminated panel wall systems against defect arising due to glue line failure for a period of five (5) years from the time of installation.

This warranty is not issued against fire, flood, free water or other conditions not normal to an indoor facility. Damage to our panels due to excessive humidity or moisture is not covered under this warranty.

CARE AND MAINTENANCE: PSI Wall Systems clad in decorative surfaces are easy to keep clean: oil-free rags and a minimum of clear, clean water will take care of most soiled areas. Do not use cleaners which contain abrasives, acids or alkalis; they will damage the decorative surface. Stubborn stains can be removed with a hypochloride bleach Clorox®, followed by several clean water rinses.

Our customer service includes trained personnel available for:

  • Design/Color Specification Consultation
  • Product Literature
  • Cost/Budget Information
  • Technical Information
  • Samples
  • Job Site Installation Assistance

3115 Range Road • Temple, Texas 76504
1-800-947-9422 • 254-774-9800
254-774-7222 Fax

Copyright 1999-2002 PSI